We will use your email address only for sending you newsletters. Please see our Privacy Notice for details of your data protection rights.
Petrol and diesel owners can cut down on their fuel consumption by braking softly and always being in the correct gear, according to experts at USwitch. “Revving your engine” can take its toll on the vehicles and use up to 30 percent more fuel, according to the experts.
They urge that drivers keep checking “three or four cars ahead” to ensure they can anticipate when traffic is set to slow down.
As well as helping to reduce the running costs, harsh braking can put pressure on key parts which could lead to failures.
Harsh braking can also increase your overall road risk and may make you more susceptible to accidents and vehicle damage.
A spokesperson for USwitch said: “Revving your engine and harsh braking can take its toll on your car and your carbon footprint, so try to keep your speed at a nice, steady pace and keep your distance from the driver in front if you want to be a green driver.
“Harsh braking is said to use up to 30 percent more fuel and damage your brakes over time, which means you could also save yourself a small fortune by taking more caution when out on the road.
“As braking sharply often results in traffic slowing to a near stop due to the delayed reaction of drivers behind, by observing the three or four cars ahead, it becomes easier to anticipate and judge the necessary speed.”
The RAC warns that excessive speed is the “biggest fuel-guzzling factor” on the road as they urged drivers to accelerate with caution.
Experts at the AA said the easiest way to reduce fuel costs was to drive smoothly and to read the road ahead.
Parents pay up to £750 to cover their child’s running costs [INSIGHT]
Which? Says running costs can be reduced today [ANALYSIS]
Petrol and diesel owners to face £8 daily charge within months [COMMENT]
They warn that stopping and starting a vehicle uses more fuel than keeping it running when moving into traffic.
They also warned that going faster uses more fuel, adding that drivers can use up to nine percent more fuel driving at 70mph than 60mph.
Experts at USwitch have noted that gear changes can be just as important with drivers able to save between “10 and 30 percent” by simply being in the correct gear at the right time.
They warn that driving at higher revs will increase consumption and put more pressure on key parts.
A spokesperson for USwitch said: “Did you know that the quicker and smoother you move up a gear the more fuel you will save?
“In fact, fuel consumption can be reduced by 10 to 30 percent by simply moving up a gear rather than accelerating up to the red line on the rev counter.
“Dropping into lower gears and driving at higher revs will increase your fuel consumption.
“It’s recommended that you change between 1,500 and 2,500 rpm as this can help to reduce your fuel consumption by as much as 15 percent — thus releasing less toxicity into the atmosphere.
“With older vehicles, gear changing was a necessary action, used to help slow the car down.
“However, with today’s cars, it’s possible to slow without going down the gears, meaning that to drive economically, you don’t have to move through the gears one by one before stopping.”
Source: Read Full Article